8x8 HDMI Matrix
with HDMI extender up to 70m
(Support 4kx2k,HDBT,POE,RS232,bi-directional IR control)
FEATURES
Eight HDMI signals can be independently split or switched to eight displayers
Support resolution up to 4Kx2K/30Hz
Support HDBT extension
1) When input 1080P, the max distance is 70M
2) When input 4Kx2K, the max distance is 40M
Support HDMI 1.4b and HDCP1.4
Support Deep color
Support POE power supply
Support CEC (only HDBaseT port)
Support 24/30/50/60Hz refresh rate
Support audio format DTS-HD/Dolby-trueHD/LPCM7.1/DTS/DOLBY-AC3/DSD
Support signal timing reset
Support AWG26 HDMI standard cable, input up to 10 meters, output up to 10 meters
Support bi-directional IR extension, support IR remote control for matrix switching, support local infrared extension for matrix control
Support RS232 control
DIP switch for EDID setting
Power adapter: AC 110~240V
: HDMI Outputs 1-8's corresponding HDMI input signals, showing with numbers
: Local infrared control of matrix
: IR receiver data indicator
: Left button
: Down button
: Enter button
: Right button
: Up button
| No. | fault phenomenon | Reason and solution |
| 1 | No electricity | 1.Check that if power plug is properly inserted into the power outlet 2.Check that if the power is on. |
| 2 | No image | 1.Confirm television has been turned on and is connected to the machine. 2.Whether the input signal source open and connect in good condition. 3.Check the connection state of the system. 4.Check whether the cable is in good condition. 5.Cable quality (HDMI cables is required to conform to the HDMI standard). |
| 3 | Image blurring | 1.reconnect the port, in case of poor connection of socket interface 2.cable quality (HDMI cables is required to conform to the HDMI standard). |
1. HDMI matrix 8x8 x1pc
2. IR Remote control x1pc
3. 110~240V power supply cord x1pc
4. User manual
5. IR cables (16pcs receivers and 16pcs tranmitters)