50M/60M/100M/120M High Quality HDMI Extender Over Ethernet
Features:
One piece of CAT-5e/6 cable can substitute HDMI cable to achieve long distance transmission.
Follow the standard of IEEE-568B
Transmission distance can be up to 200Ft (60 meters) for 1080p using CAT-6 Cable
Auto-adjustment of feedback, equalization and amplify, the user does not need to care about the length of the cable
Signalling rates up to 1.65Gbps in support of 1080P display
Specification:
Introduction 2.Support 3D 3.Supports Bi-directional IR control 4.Support highest video resolution up to 4K/30Hz 5.Support 1.5Gbps data rate and tmds clock up to 148.5MHz 6.Support 8 bit deep color 7.Support AWG26 HDMI standard cable, input up to 10 metres, output up to 15 metres 8.Signal transmission:By using single cat-5e/cat-6(recommended) cable instead of HDMI cable, it can extend the distance up to 60 meters between TX and RX. 9.No loss of quality 10.Install in minutes Operating and Connecting: 1.Connect one HDMI cable between source device and TX Extender, the max cable distance is 10 meters 2.Connect one HDMI cable between display device and RX Extender, the max cable distance is 15 meters 3.Connect TX and RX Extender via single cat 5E/ 6 cable , the max distance is 60 meters 4.Pls insert the IR RX cables and IR TX cables into the ports of IR RX and IR TX on Transmitter and Receiver 5.Connect 5V power supply to the TX and RX. 6.LED indicator light TX LED indicator light: when there is no signal input, it turns blue;when there is signal input, it turns red. RX LED indicator light: when there is no signal input, it turns blue;when there is signal input, it turns red. |
Note:
Quality of the network cable will affect the transmit length
Package Included:
1 x Sender
1 x Receiver
2 x Power adapters
Picture:
