Best 60m HDMI Extender Over Single Cat5e/6( Bi-Direction IR+EDID)
Feature:
1.Each set includes one Sender and one Receiver.
2.Use single UTP LAN cable(Cat 6)to substitute HDMI cable to achieve long transmission distance, the UTP Cable follows the standard of IEEE-568B.
3.Transmission distance extends up to 60 meters under 1080P.
4.Supports lossless compressed digital audio: Dolby True-HD, DTS-HD Master Audio.
5.Transmit Digital Audio and Video over the CAT6 cable with zero signal loss.
6.Data transfer speed 6.75 Gbps.
8.Support HDCP 1.2
9.Support EDID
10. DC 5V power supply
| Specifications | |
| Operating Temperature Range | -5 to +35ºC(+23 to +95ºF) |
| Operating Humidity Range | 5 to 90%RH (No Condensation) |
| Input Video Signal | 0.5-1.0 Volts P-P |
| Input DDC Signal | 5 volts p-p(TTL) |
| Support Video Format | DTV/HDTV:480i/576i/480P/576P/720P/108 |
| 0i/1080P/3D video/Bi-directional IR | |
| Video Output | HDMI ,HDCP |
| Support Audio Format | DTS-HD Master Audio,Dolby true-HD etc. |
| Transmission Distance | 1080P 8-bit 60m(Maximum) over single |
| CAT5E/6 /24AWG/Solid | |
| Power consumption | 5watts(Maximum) |
| Dimension (L×W×H) | 81.5x43.5x23mm |
| Net Weight | 250g(Pair) |
| Note1: Specifications are subject to change without notice. Mass and dimensions are approximate. | |
| Sink must support 3D video when sources is 3D device | |
| When in 36Bits deep color mode, we suggest set the HDMI source device to output 1080i or 720p. | |
Package Contents
Sender Panel
1: Red instruction power 2: Blue instruction signal
3: HDMI input 4: Power input
5: CAT 6 output 6: IR-TX 7: IR-RX
8:EDID copy mode: connect the display to the HDMI input port, then press the key, it'll copy the EDID to the extender; Reset EDID: press the key for 3 seconds, it'll reset the EDID to 1080P 3D stereo.
Receiver Panel
1: Red instruction power 2: Blue instruction signal
3: HDMI output 4: Power input
5: CAT 6 input 6: IR-TX 7: IR-RX
Connecting and Operating
1) Connect the HDMI signal sources (Such as PS3, STB etc) to HDMI Sender.
2) Connect CAT 6 cables to both the outputs of the Sender and inputs of the Receiver. (The cables must follow the standard of EIA-TIA 568B).
3) Connect the HDMI output (Such as HD-LCD, HD-DLP) into the Receiver.
Attention: Insert/Extract cables carefully.
Maintenance
Clean this unit with a soft, dry cloth. Never use alcohol, paint thinner of benzene to clean this unit.
3: HDMI input 4: Power input
5: CAT 6 output 6: IR-TX 7: IR-RX
8:EDID copy mode: connect the display to the HDMI input port, then press the key, it'll copy the EDID to the extender; Reset EDID: press the key for 3 seconds, it'll reset the EDID to 1080P 3D stereo.
Receiver Panel
1: Red instruction power 2: Blue instruction signal
3: HDMI output 4: Power input
5: CAT 6 input 6: IR-TX 7: IR-RX
Connecting and Operating
1) Connect the HDMI signal sources (Such as PS3, STB etc) to HDMI Sender.
2) Connect CAT 6 cables to both the outputs of the Sender and inputs of the Receiver. (The cables must follow the standard of EIA-TIA 568B).
3) Connect the HDMI output (Such as HD-LCD, HD-DLP) into the Receiver.
Attention: Insert/Extract cables carefully.
Maintenance
Clean this unit with a soft, dry cloth. Never use alcohol, paint thinner of benzene to clean this unit.